meta data for this page
  •  

This is an old revision of the document!


2.C.1 - Iron & Steel Production

Short description

Source category NFR 2.C.1 - Iron & Steel Production comprises process-related emissions from oxygen steel and electric-steel production.

Category Code Method AD EF
2.C.1 T2 NS CS
Key Category SO₂ NOₓ NH₃ NMVOC CO BC Pb Hg Cd Diox PAH HCB TSP PM₁₀ PM₂ ₅
2.C.1 L/- - - - L/- - L/T L/T L/T L/T - - L/T L/T L/T

Click to view Legend

Click to hide Legend

T = key source by Trend L = key source by Level

Methods
D Default
RA Reference Approach
T1 Tier 1 / Simple Methodology *
T2 Tier 2*
T3 Tier 3 / Detailed Methodology *
C CORINAIR
CS Country Specific
M Model
* as described in the EMEP/CORINAIR Emission Inventory Guidebook - 2007, in the group specific chapters.
AD - Data Source for Activity Data
NS National Statistics
RS Regional Statistics
IS International Statistics
PS Plant Specific data
AS Associations, business organisations
Q specific questionnaires, surveys
EF - Emission Factors
D Default (EMEP Guidebook)
C Confidential
CS Country Specific
PS Plant Specific data


In 2019 a total of 27.7 million t of raw steel was produced in six integrated steelworks. Electrical steel production amounted to another 11.9 million t.

Other structural elements are sinter production, hot iron production, hot rolling, iron and steel foundries (including malleable casting). The last Siemens-Martin steel works (Stahlwerk Brandenburg) was shut down shortly after 1990; the last Thomas steel works (Maxhütte Sulzbach-Rosenberg) discontinued its production in 2002. Due to their minor relevance and the phasing out, the emissions from Siemens-Martin and Thomas steel production are jointly calculated with the emissions from oxygen steel production.

Energy-related emissions from steel production for the years 1990 - 1994 (for individual pollutants until 1999) are reported under 1.A.2.a.

 Illustration Blast Furnace

Method

Activity data

Activity data are is collected from plant operators by national institutions. After discontinuation of the special public statistics for iron and steel production (FS. 4, R. 8.1), the information is collected by the German steel trade association Wirtschaftsvereinigung Stahl (WV Stahl) based on a formal agreement.

As the activity rates for 2017 could not be provided by WV Stahl as a result of compliance issues, aggregated figures from emissions trading were used instead. The consistency of emissions trading data has been verified against comparative figures for previous years. The deviations were less than 1%, only in sinter production they are noticeably higher (maximum + 8%).

In the iron and steel industry, only minor amounts of secondary fuels are used for pig iron production in individual blast furnaces. They are used as substitute reducing agents, instead of coke and coal. To date, these materials have not yet been included in the national statistics and in the Energy Balance. For this reason, the data used is also provided by the steel trade association (WV Stahl).

Emission factors

The emission factors used for emissions calculation are based on emission data from individual plants, either determined by the Umweltbundesamt (UBA) itself (emission factors for 1995 - 2001) or by a research project (emission factors for 2008 and later).

As the EF for the years 1995 - 2001 as well as for 2008 are based on real stack emission data, it is not possible to distinguish between combustion and process emissions (they are emitted via the same stacks). Hence whereever plant-based EF were availaible, i.e. for most pollutants for the years 1995 and later, all emissions are reported under 2.C.1.

Please note that the reported emissions also cover diffuse emissions from sources that are not covered in the EMEP/EEA Guidebook. For many pollutants and sources, individual EFs for channelled as well as diffuse emissions have been determined. While there is sufficient knowledge and measurement data of channelled emissions, the emission data concerning diffuse sources is usually based on estimations, using parameters adapted to the local conditions of the individual emission source. Therefore, emission data for one source of diffuse emissions is hardly significant for the diffuse emissions from other plants. The emission factors given below were calculated as the weighted average of pollution loads reported for individual diffuse sources by the plant operators, in relation to their corresponding production amounts.

Table 1: Overview of applied emission factors applied for sinter production

pollutant Type of source EF 1990 EF 1995 EF 2000 EF 2005 EF 2010 unit
Cd 0.098 0.052 0.017 g/t
CO 19.152 17.325 15.497 14.4 kg/t
Cr 0.077 0.044 0.02 g/t
HCB 0.03 mg/t
Hg 0.059 0.028 0.005 g/t
Ni 0.139 0.068 0.015 g/t
NMVOC 0.12 kg/t
NOx IE1) 0.558 0.46 0.401 kg/t
PAH 320.00 248.571 177.143 120 mg/t
Pb 5.299 3.242 1.7 g/t
PCB 3.0 2.285714 1.571429 1 mg/t
PCDD/F 6.0 4.575 3.149 1.724 0.796 µg/t
SO2 IE2) 1.08 0.837 0.691 kg/t
TSP channelled 0.65 0.465 0.234 0.096 kg/t
TSP diffuse 0.046 kg/t
PM10 channelled 0.445 0.336 0.177 0.07 kg/t
PM10 diffuse 0.016 kg/t
PM2.5 channelled 0.214 0.206 0.13 0.056 kg/t

Table 2: Overview of applied emission factors applied for pig iron production

pollutant Type of source EF 1995 EF 2000 EF 2005 EF 2010 unit
B(a)P 0.05 mg/t
Cd channelled 4.0 mg/t
Cd diffuse 0.203 mg/t
CO channelled 1.18 0.915 0.65 0.491 kg/t
CO diffuse 0.398 kg/t
Cr channelled 0.019 0.006 0.002 0.001 g/t
Cr diffuse 0.008 g/t
Hg channelled 2.436 0.192 0.015 0.003 mg/t
Hg diffuse 0.005 mg/t
Ni channelled 21.0 6.0 2.0 1.0 mg/t
Ni diffuse 8.0 mg/t
NMVOC 18.525 g/t
NOx channelled 0.051938 0.051938 0.051938 0.0517 kg/t
NOx diffuse 0.001 g/t
Pb channelled 0.022 g/t
Pb diffuse 0.011 g/t
PCDD/F 0.026 0.009 0.004 0.004 µg/t
SO2 channelled 0.242 g/t
SO2 diffuse 0.04 kg/t
TSP channelled 0.022 0.015 0.01 0.008 kg/t
TSP diffuse 0.016 g/t
PM10 channelled 0.013 0.009 0.006 0.006 kg/t
PM10 diffuse 0.007 kg/t
PM2.5 channelled 0.009 0.007 0.005 0.004 kg/t

Table 3: Overview of applied emission factors applied for oxygen steel production

pollutant Type of source EF 1995 EF 2000 EF 2005 EF 2010 unit
Cd 0.053 0.038 0.024 0.016 g/t
CO 11.500 11.077 10.654 10.400 kg/t
Cr channelled 0.715 0.306 0.125 0.028 g/t
Cr diffuse 0.069 g/t
Ni channelled 0.090 0.060 0.030 0.006 g/t
Ni diffuse 0.004 g/t
NOx channelled 0.006 0.005 0.005 0.004 kg/t
NOx diffuse 0.0037 kg/t
PAH 0.100 mg/t
Pb channelled 2.941 1.883 0.824 0.189 g/t
Pb diffuse 0.278 g/t
PCB 2.670 1.740 1 1 mg/t
PCDD/F 0.070 0.070 0.070 0.069 µg/t
SO2 diffuse 0.001 kg/t
TSP channelled 0.155 0.145 0.145 0.024 kg/t
TSP diffuse 0.049 kg/t
PM10 channelled 0.099 0.093 0.093 0.020 kg/t
PM10 diffuse 0.019 kg/t
PM2.5 channelled 0.025 0.023 0.023 0.017 kg/t

Table 4: Overview of applied emission factors applied for electric steel production

pollutant Type of source EF 1995 EF 2000 EF 2005 EF 2010 unit
B(a)P 2.531 1.661 0.792 0.271 mg/t
Cd 0.240 0.157 0.065 0.016 g/t
CO channelled 1.700 1.187 0.674 0.366 kg/t
CO diffuse 0.001 kg/t
Cr channelled 0.481 0.206 0.258 0.323 g/t
Cr diffuse 0.851 g/t
Hg channelled 0.306 0.288 0.154 0.070 g/t
Ni channelled 0.483 0.207 0.145 0.124 g/t
Ni diffuse 0.284 g/t
NMVOC 0.035 0.024 0.012 0.006 kg/t
NOx channelled 0.122 0.12 0.106 0.098 kg/t
NOx diffuse 0.014 kg/t
PAH 45 22 3.793 3.793 mg/t
Pb channelled 4.075 1.747 0.720 0.170 g/t
Pb diffuse 0.056 g/t
PCB 5.68 3.360 1.500 1.500 mg/t
PCDD/F 0.466 0.295 0.158 0.158 µg/t
SO2 channelled 0.113 kg/t
SO2 diffuse 0.004 kg/t
TSP channelled 0.28 0.12 0.074 0.018 kg/t
TSP diffuse 0.043 kg/t
PM10 channelled 0.179 0.08 0.051 0.013 kg/t
PM10 diffuse 0.007 kg/t
PM2.5 channelled 0.045 0.04 0.038 0.011 kg/t

Table 5: Overview of applied emission factors applied for hot and cold rolling

pollutant Type of source EF 1995 EF 2000 EF 2005 EF 2010 unit Trend
CO 0.005 kg/t constant
NH3 0.700 g/t constant
NMVOC 0.003 kg/t constant
NOx 0.410 0.276 0.196 kg/t falling
SO2 0.059 0.050 0.044 kg/t falling
TSP channelled 0.020 kg/t constant
TSP diffuse 0.010 kg/t constant
PM10 channelled 0.304 g/t constant
PM10 diffuse 0.645 g/t constant
PM2.5 channelled 0.266 g/t constant

Table 6: Overview of applied emission factors applied for iron and steel casting

pollutant EF 2010 unit Trend
B(a)P 10 mg/t constant
NH3 0.027 kg/t falling
NMVOC 0.150 kg/t constant
NOx 0.242 kg/t falling
PAH 0.100 g/t constant
PCDD/F 0.190 µg/t constant
SO2 0.256 kg/t falling
TSP 0.200 kg/t constant
PM10 0.137 kg/t constant
PM2.5 0.0836 kg/t constant

Trends in emissions correspond to trends of emission factors in the table above, in many cases due to regulatory measures. Since 2010, the main driver for the emission trends in most cases is the activity data.

Recalculations

Replacing data of the preliminary energy balance with data of the final energy balance leads to restatements for the years 2017 and 2018.

For more information on recalculated emission estimates for Base Year and 2018, please see the pollutant specific recalculation tables following chapter 8.1 - Recalculations.

Planned improvements

HCB emissions from iron and steel production have not been included so far due to a lack of emission data (notation key NE). In the past, the standard emission factor was not considered as appropriate, because it was unclear from what kind of data the factor was derived from and to which process/activity rate it actually referred to. In order to overcome this data gap, information will be collected within the scope of a reserach project for updating and completing the emission factors for the sector. The project will start in 2021 and is designed to run three years.

As long as no country specific emission factor for HCB has been derived, the standard emission factor is used. In implementing the EMEP/EEA Guidebook standard emission factor Germany is following recommendations provided by the Expert Review Team for the NECD-Review in 2020.

1) , 2)
Emissions were reported under NRF Code 1.A.2.a