meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
sector:energy:fuel_combustion:energy_industries:petroleum_refining [2022/03/22 09:47] – [Recalculations] kotzullasector:energy:fuel_combustion:energy_industries:petroleum_refining [2024/11/06 14:54] (current) – external edit 127.0.0.1
Line 2: Line 2:
  
 ===== Short description ===== ===== Short description =====
 +
 +{{ :sector:energy:fuel_combustion:energy_industries:refinery.png?nolink&400|}}
  
 Source catagory //Petroleum Refining (1.A.1.b)// comprises both refinery heating plants and electricity and heat production of refinery power plants. Source catagory //Petroleum Refining (1.A.1.b)// comprises both refinery heating plants and electricity and heat production of refinery power plants.
  
-^ Category Code  ^  Method                                                                           ||||^  AD                                           ||||^  EF                                ||||| +^  NFR Code                               ^  Method  ^  AD  ^  EF  ^ 
-| 1.A.1.b        |  T2                                                                               |||||  NS                                           |||||  CS                                ||||| +|  1.A.1.b                                |  T2      |  NS  |  CS  | 
-^                ^  NO<sub>x</sub>  ^  NMVOC  ^  SO<sub>2</sub>  ^  NH<sub>3</sub>  ^  PM<sub>2.5</sub>  ^  PM<sub>10</sub>  ^  TSP  ^  BC   ^  CO   ^  PB   ^  Cd   ^  Hg   ^  Diox  ^  PAH  ^  HCB  ^ +|  {{page>general:Misc:LegendEIT:start}}                        ||||
-| Key Category:  |  -/-             |  -/-    |  L/-             |  -/-             |  -/-               |  -/-              |  -/-  |  -/-  |  -/-  |  -/-  |  L/-  |  -/-  |  -/-   |  -/-  |  -    |+
  
 +----
 +
 +^ NO<sub>x</sub>                          ^  NMVOC  ^  SO<sub>2</sub>  ^  NH<sub>3</sub>  ^  PM<sub>2.5</sub>  ^  PM<sub>10</sub>  ^ TSP  ^  BC   ^  CO   ^  Pb   ^  Cd   ^  Hg   ^  As   ^  Cr   ^  Cu   ^  Ni   ^  Se   ^  Zn   ^  PCDD/F  ^  B(a)P  ^  B(b)F  ^  B(k)F  ^  I(x)P  ^  PAH1-4  ^  HCB  ^  PCBs  ^
 +|  -/-                                    |  -/-    ^  L/-             |  -/-             |  -/-               |  -/-              |  -/- |  -/-  |  -/-  |  -/-  ^  L/-  |  -/-  |  -/-  |  -/-  |  -/-  |  -/-  |  -/-  |  -/-  |  -/-     |  -/-    |  IE     |  IE     |  IE     |  -/-     |  -/-  |  -/-   |
 +|  {{page>general:Misc:LegendKCA:start}}                                                                                                                                                                                                                                                ||||||||||||||||||||||||||
  
-{{page>general:Misc:LegendEIT:start}} 
  
-{{ :sector:energy:fuel_combustion:energy_industries:refinery.png?nolink&600|}} 
  
 ===== Methodology ===== ===== Methodology =====
  
-Refinery processes are very complex. Therefore the development of an adequate calculation method is demanding. Since plant specific data are not complete and partly contradictory, a plant specific reporting is not possible. Data is used to determine fuel specific emission factors as general basis of the calculation model. However, in reality, a large number of several fuels and waste fuels with different fuel characteristics is used for combustion processes. Insofar the calculation model is limited. +Refinery processes are very complex. Therefore the development of an adequate calculation method is demanding. Since plant specific data are not complete and partly contradictory, a plant specific reporting is not possible. Data is used to determine fuel specific emission factors as general basis of the calculation model. However, in reality, a large number of fuels and waste fuels with different fuel characteristics is used for combustion processes. Insofar the calculation model is limited. 
 Only some refinery power plants use wet desulfurisation in order to decrease sulfur emissions. Usually the fuels mix ensures the compliance with the limit values.       Only some refinery power plants use wet desulfurisation in order to decrease sulfur emissions. Usually the fuels mix ensures the compliance with the limit values.      
  
 ==== Activity data ==== ==== Activity data ====
  
-Fuel inputs for electricity production in refinery power stations are included in Energy Balance line 12 ("Industrial thermal power stations"). Energy Balance line 38 shows energy consumption (for heat production) of refineries (AGEB 2019)[(Arbeitsgemeinschaft Energiebilanzen (Hrsg.): Energiebilanz für die Bundesrepublik Deutschland; URL: http://www.ag-energiebilanzen.de/7-1-Energy-Balance-2000-to-2015.html)]. +Fuel inputs for electricity production in refinery power stations are included in Energy Balance line 12 ("Industrial power stations (only for electricity)"). Energy Balance line 38 ("Refineries") shows the energy consumption (for heat production) of refineries [(AGEB2024> AGEB, 2024: National energy balance and Satellite balance for renewable energy:  https://ag-energiebilanzen.de/en/data-and-facts/energy-balance-2000-to-2030/ )]. 
  
 Fuel inputs for heat production in refinery power plants and for bottom heating in refinery processes, are derived from these figures. Fuel inputs for heat production in refinery power plants and for bottom heating in refinery processes, are derived from these figures.
Line 34: Line 38:
  
 Emission factors are available for different fuel types and combustion technologies. The distinction between refinery power plants and bottom heating in refinery processes is necessary since bottom heating systems have considerably higher specific emissions. Emission factors are available for different fuel types and combustion technologies. The distinction between refinery power plants and bottom heating in refinery processes is necessary since bottom heating systems have considerably higher specific emissions.
-A running project which has to evaluate data from emission declarations for the years 2004, 2008, 2012 and 2016 for all refineries will provide refinery gas emission factor data for Submission 2020. The first results show the following range:+Results of a project which has to evaluate data from emission declarations for the years 2004, 2008, 2012 and 2016 for all refineries will provide refinery gas emission factor data. The first results show the following range:
  
-__Table: Range of emission factors, in kg/TJ__+__Table 1: Range of emission factors, in kg/TJ__
 |                 ^  Range          ^ |                 ^  Range          ^
 ^ SO<sub>2</sub>  |  4.79 - 16.09   | ^ SO<sub>2</sub>  |  4.79 - 16.09   |
Line 50: Line 54:
 The following diagram gives an overview of the fuel consumption in the refinery sector. The following diagram gives an overview of the fuel consumption in the refinery sector.
  
-{{:sector:energy:fuel_combustion:energy_industries:1a1b_ar.png?400|}}+{{:sector:energy:fuel_combustion:energy_industries:1a1b_ad.png?700|}}
  
 Since 1990, fuel consumption has shown a slightly increasing trend overall. While some relevant installations have been decommissioned since 1990 - especially in the territory of the former GDR - production increased nevertheless. And while installation efficiencies were improved, increased production of lighter petroleum products and intensified hydrosulphurisation, which led to increases in specific fuel consumptions. Annual fluctuations of all fuel types can be explained as the result of differences in production quantities. The maximum production of petroleum products to date, totalling 123.6 million t, occurred in 2005, as a result of a shortfall in capacity in the USA, which led to an increase in imports. Thereafter, production decreased by reducing excess capacities like everywhere in Europe. Since 1990, fuel consumption has shown a slightly increasing trend overall. While some relevant installations have been decommissioned since 1990 - especially in the territory of the former GDR - production increased nevertheless. And while installation efficiencies were improved, increased production of lighter petroleum products and intensified hydrosulphurisation, which led to increases in specific fuel consumptions. Annual fluctuations of all fuel types can be explained as the result of differences in production quantities. The maximum production of petroleum products to date, totalling 123.6 million t, occurred in 2005, as a result of a shortfall in capacity in the USA, which led to an increase in imports. Thereafter, production decreased by reducing excess capacities like everywhere in Europe.
Line 57: Line 61:
 ===== Recalculations ===== ===== Recalculations =====
  
-Recalculations were necessary for the latest reference year (2019) due to the availability of the National Energy Balance. Germany has a federal structure which causes a time lack of the National Energy Balance. Therefore, recalculations are always necessary. +For the purpose of improving the data quality National Energy Balances for the years 2003 to 2021 have gone under revisions through fine-tuning of the computational models, consideration of new statistics or re-allocation of activity data, along with other revision mechanisms. These updates led to re-calculations in fuel uses in different sub-categories and in their corresponding emissions. 
  
 <WRAP center round info 60%> <WRAP center round info 60%>
-For **pollutant-specific information on recalculated emission estimates for Base Year and 2019**, please see the pollutant specific recalculation tables following [[general:recalculations:start|chapter 8.1 - Recalculations]].+For **pollutant-specific information on recalculated emission estimates for Base Year and 2021**, please see the recalculation tables following [[general:recalculations:start|chapter 8.1 - Recalculations]].
 </WRAP> </WRAP>