1.A.3.d - Navigation

Category 1.A.3.d - Navigation includes emissions from national and international inland and maritime navigation.

Primary fuel deliveries data for the entire navigation sector (maritime and inland waterways) is included in lines 6 ('International Maritime Bunkers') and 64 ('Coastal and Inland Navigation') of the National Energy Balance (NEB) (AGEB, 2021) ¹⁾. (For comparison, official mineral-oil data of the Federal Office of Economics and Export Control (BAFA, 2021) ²⁾ are used, too.)

Data on the consumption of biodiesel is provided in NEB line 64 from 2004 onward. However, as this data appears to be rather inconsistent, the consumption of biofuels is calculated within TREMOD via the official annual blending rates.

Table 1: Primary fuel deliveries as listed in the National Energy Balance, in terajoules

source: National Energy Balances ³⁾

As the statistical allocation of fuels delivered to the navigation (shipping) sector follows tax aspects, NEB line 6 ('International Maritime Bunkers') includes all fuel deliveries to IMO-registered ship involved in both national and international maritime activities. On the other hand, NEB line 64 ('Coastal and Inland Navigation') includes all fuel deliveries to ship involved in inland and non-IMO maritime navigation.

Table 2: Allocation of for subsector-specfic fuel deliveries data in the NEB

Therefore, the amounts of fuels listed in NEB lines 6 and 64 are broken down on several sub-sectors.

Regarding all national maritime activities, taking place in National Maritime Navigation, national fishing, and military navigation, a country-specific approach allows for estimating tier3 fuel consumption data based on ship movement information (AIS signal) for IMO- and non-IMO ships.

In contrast to this bottom-up approach, fuel consumption in both international maritime navigation and national inland navigation are calculated as tier1 estimates. The following equations and charts try to illustrate the way of deducing these tier1 activity data:

Estimating the tier1 activity data for International maritime navigation:

Estimating the tier1 activity data for National inland navigation:

Table 3: Resulting breakdown of primary fuel deliveries onto the different navigation sub-sectors, in terajoules

Annual country-specific emission factors have been developed within the underlying models maintained at the ifeu Institute for Energy and Environmental Research (Knörr et al. (2021a): TREMOD) ⁴⁾ and the Federal Maritime and Hydrographic Agency (Deichnik (2021): BSH model) ⁵⁾.

For information on these country-specific emission factors, please refer to the sub-chapters linked above.

Furthermore, for heavy metal and POP emissions tier1 EF have been derived from the EMEP/EEA Guidebook 2019 mainly ⁶⁾.

Table 4 shows the tier1 emission factors for exhaust emissions of heavy-metals and POPs as applied to all navigation sub-categories in 1.A.3.d as well as NFRs 1.A.4.c iii and 1.A.5.b iii. The listed values have been derived from default values provided in the EMEP/EEA air pollutant emission inventory guidebook (EMEP/EEA, 2019) ⁷⁾ and (Rentz et al., 2008) ⁸⁾.

Here, as the guidebook does not provide source-specific values for PAHs, respective values provided for diesel in railways and heavy duty road vehicles have been applied as a gap-filling proxy.

Table 4: Tier1 emission factors for heavy-metal and POP exhaust emissions

² tier1 defaults from ⁹⁾, Chapter: 1.A.3.d.i, 1.A.3.d.ii, 1.A.4.c.iii Navigation: Table 3-2
³ tier1 defaults from ¹⁰⁾, Chapter: 1.A.3.d.i, 1.A.3.d.ii, 1.A.4.c.iii Navigation: Table 3-1
⁴ sum of tier1 default values applied for B[a]P, B[b]F, B[k]F, and I[1,2,3-c,d]P
⁵ tier1 defaults from ¹¹⁾, Chapter: 1.A.3.c Railways: Diesel, Table 3-1
⁶ tier1 defaults from ¹²⁾, Chapter: 1.A.3.b.i, 1.A.3.b.ii, 1.A.3.b.iii, 1.A.3.b.iv - Road transport, Table 3-8: HDV, Diesel
⁷ tier1 value derived from ¹³⁾